The Calling Contacts tab contains the following fields:
Figure 113. Cameras Calling Contacts tab screen
•Contact No. – Number of the alarm contact associated with the camera
•Preset or Pattern – Preset or Pattern number associated with the camera
•Link – Choose either No, Yes, Wired, No Group Ack, Yes Group Ack, or Wired Group Ack
•Aux – Choose either Don’t Care, Aux 1 On, Aux 1 Off, Aux 2 On, Aux 2 Off, Aux 3 On, Aux 3 Off, or Aux 4 On
•Dwell – Enter the dwell time in seconds
•Alarm Message – Enter the alarm message number to be associated with the camera. Note: Alarm messages are first created in the Alarms – Alarm Messages screen.
•Email Message – Enter the Email message number to be associated with the camera. Note: Email messages are first created in the Alarms – Email Messages screen.
Removing Calling Contacts
To remove calling contacts from a camera:
1.Click on a camera (any cell in the keyboard row) in the upper screen.
2.Click on the calling contact row to be removed in the Calling Contacts tab in the lower screen.
3.Press the keyboard Delete key of the PC running EASY CPU. The Delete Rows dialog box appears.
Figure 114. Delete Rows dialog
4.Click Yes to delete the calling contact definition or No to retain the definition.
Associating Keyboards to Cameras
The Partitions – Keyboards to Cameras screen determines the level of control that keyboard operators can have over cameras.
Click on the Partitions – Keyboards to Cameras link in the Explore menu to begin. The following screen appears (Figure 115 on page 53).
Figure 115. Partitions – keyboards to cameras screen
The Partitions – Keyboards to Cameras screen is split into two sections:
•The upper screen shows existing keyboard definitions and allows you to create new definitions. Ranges for camera view access and camera control access are set up in this screen.
The cameras associated with the keyboard are listed in the Camera View Access and the Camera Control Access columns.
The Camera View Access column allows you to enable selected keyboards to view, but not control, cameras, while the Camera Control Access column allows you to enable selected keyboards to control cameras.
•The lower screen provides two tabs that allow you to set up monitor and site access for each keyboard.
You can create and delete monitor and site access definitions.
MEGAPOWER CPU ADMINISTRATOR’S GUIDE
53 of 82
