D-Link DCS5020L user manual Zero Configuration Setup, Connect the Ethernet Cable and Power Cable

Section 2 - Installation

Zero Configuration Setup

If you have a mydlink-enabled Cloud Router, you can take advantage of Zero Configuration Setup. Zero Configuration automatically configures your camera's settings for you and adds the camera to your mydlink account automatically.

Step 1 - Connect the Ethernet Cable and Power Cable

Use the included Ethernet cable and plug it into the camera. Plug the other end into an available (LAN) port on your D-Link Cloud Router. Connect the power adapter into the power port on the back of the camera.

Note: If you wish to use your camera wirelessly, you will be able to remove the cable after the Zero Configuration Setup is complete.

Step 2 - Attach the External Power Adapter

Plug the power adapter into a wall outlet or surge protector.

D-Link DCS-5020L User Manual 11