![](/images/new-backgrounds/1295845/29584525x1.webp)
Section 2 - Installation
Zero Configuration will navigate to the mydlink Live View tab for your camera where you will see a screen similar to the following.
If you wish to connect your camera to your router wirelessly, you can simply disconnect the Ethernet cable and move the camera to its intended location. Your router's wireless settings have been automatically transferred to the camera and no further configuration is required.
Your camera is now set up. You can skip to “mydlink” on page 18 to learn more about the mydlink features of this camera, or go to “Configuration” on page 19 for advanced configuration.
Note: If the live image is blurry or out of focus, you can manually adjust the focus by rotating the manual focus bezel surrounding the camera lens.
13 |