Fast Ethernet Switching System User’s Guide

Power On

The power supply will adjust to the local power source automatically. The DES-5024 may be plugged in without having any or with all LAN segment cables connected.

The power plug is located at the rear of the DES-5024. Plug the cable into the wall socket and plug the other end into the DES-5024. There is a power on/ off switch located at the rear of the DES-5024. Move the switch to the on position to power the DES-5024 on. The Power LED will light and all ports will auto negotiate the proper speed and duplex mode when the DES-5024 is powered on.

Reboot the DES-5024 if there is a problem. Contact D-Link Systems, Inc. for technical support.

Check the configuration of the DES-5024 after a power failure but do not reset unless it is necessary.

The DES-5024 can be used with power sources in the range 100 to 240 VAC., 50 to 60 Hz.

Installing the DES-5024

17

Page 25
Image 25
D-Link DES-5024 manual Power On