DI-206 ISDN Remote Router

Note: All network addresses outside of these ranges (Class D and E) are either reserved or set aside for experimental networks or multicasting.

When an IP address's host portion contains only zero(s), the address identifies a network and not a host. No physical device may be given such an address.

The network portion must start with a value from 1 to 126 or from 128 to 223. Any other value(s) in the network portion may be from 0 to 255, except that in class B the network addresses 128.0.0.0 and 191.255.0.0 are reserved, and in class C the network addresses 192.0.0.0 and 223.255.255.0 are reserved.

The value(s) in the host portion of a physical device's IP address can be in the range of 0 through 255 as long as this portion is not all-0 or all-255. Values outside the range of 0 to 255 can never appear in an IP address (0 to 255 is the full range of integer values that can be expressed with eight bits).

The network portion must be the same for all the IP devices on a discrete physical network (a single Ethernet LAN, for example, or a WAN link). The host portion must be different for each IP device — or, to be more precise, each IP-capable port or interface — connected directly to that network.

The network portion of an IP address will be referred to in this manual as a network number; the host portion will be referred to as a host number.

To connect to the Internet or to any private IP network that uses an Internet-assigned network number, you must obtain a registered IP network number from an Internet-authorized network information center. In many countries you must apply through a government agency, however they can usually be obtained from your Internet Service Provider (ISP).

If your organization's networks are, and will always remain, a closed system with no connection to the Internet or to any other IP network, you can choose your own network numbers as long as they conform to the above rules.

If your networks are isolated from the Internet, e.g. only between your two branch offices, you can assign any IP Addresses to hosts without problems. However, the Internet Assigned Numbers Authority (IANA) has reserved the following three blocks of IP Addresses specifically for private (stub) networks:

Class

Beginning Address

Ending Address

A

10.0.0.0

10.255.255.255

B

172.16.0.0

172.31.255.255

C

192.168.0.0

192.168.255.255

It is recommended that you choose private network IP Addresses from the above list. For more information on address assignment, refer to RFC 1597, Address Allocation for Private Internets and RFC 1466, Guidelines for Management of IP Address Space.

Subnet Mask

In the absence of subnetworks, standard TCP/IP addressing may be used by specifying subnet masks as shown below.

IP Class

Subnet Mask

Class A

255.0.0.0

Class B

255.255.0.0

Class C

255.255.255.0

Subnet mask settings other than those listed above add significance to the interpretation of bits in the IP address. The bits of the subnet mask correspond directly to the bits of the IP address. Any bit an a subnet mask that is to correspond to a net ID bit in the IP address must be set to 1.

97

Page 106 Page 108
Page 107
Image 107
D-Link DI-206 manual Subnet Mask
Page 106 Page 108

DI-206 specifications

The D-Link DI-206 is a versatile and reliable networking solution designed to cater to the demands of both home and small office environments. This router is equipped with a range of features and technologies that ensure efficient connectivity and seamless online experiences.

One of the key highlights of the D-Link DI-206 is its robust and user-friendly interface, which is ideal for users of all technical levels. It offers an easy setup process, typically involving a simple web-based configuration that allows users to get their network up and running in no time. The device supports multiple operating modes, including router and access point modes, making it flexible and adaptable to varying networking requirements.

The DI-206 is equipped with dual WAN ports, which provide users with the ability to connect to two separate internet connections. This feature enhances reliability and ensures continuous internet access, as it can automatically switch to a backup connection if the primary line fails. Such redundancy is particularly advantageous for businesses that require uninterrupted connectivity for operations.

In terms of performance, the D-Link DI-206 supports advanced wireless standards, offering data transfer rates that cater to modern bandwidth needs. With dual-band capabilities, it can operate on both 2.4GHz and 5GHz frequencies, allowing users to maximize their wireless coverage while minimizing interference from other devices. This is essential for activities such as streaming, gaming, and video conferencing, where bandwidth demands can be high.

Security is another critical aspect of the D-Link DI-206. It incorporates comprehensive security features, including WPA/WPA2 encryption to protect user data from unauthorized access. Additionally, the router features a built-in firewall and supports VPN passthrough, providing an extra layer of security for users engaging in sensitive online activities.

The DI-206 also offers multiple Ethernet ports for wired connections, enabling users to connect various devices such as computers, printers, and gaming consoles directly to the network. This ensures stable and high-speed internet access for devices that require a consistent connection.

Overall, the D-Link DI-206 stands out as a reliable networking device that combines performance, versatility, and security. Whether for home use or small office environments, it provides an effective solution for users looking to establish a strong and secure network. With its range of features and technologies, the DI-206 is a compelling option for those seeking to enhance their online connectivity and overall experience.
Top Page Image Contents