DI-206 ISDN Remote Router
Static IP Pool
The Static IP Pool configuration functions in much the same way as the Dynamic IP Pool configuration. The only difference is that a particular IP address can be assigned to a particular host. This is used for hosts such as servers that need to have static IP addresses to function properly or to make them accessible to remote users. The host is identified by the MAC address of its NIC, which must be entered on this screen.
Select an entry from the screen above and press <Enter>. The following screen appears:
The parameters above are described below:
•IP Address – This is the static IP address to be assigned.
•MAC Address – This specifies the physical address of the particular host that will receive the above IP address.
41
