DI-206 ISDN Remote Router
the same protocol as defined here. The None setting may be used when you do not wish dial-in users or networks to identify themselves or be subject to security.
•Call Bumping – This setting only takes effect when both B channels are connected and using multi-link PPP. If this is the case and call bumping is enabled, when you receive an outgoing voice call, the second B channel will be dropped (with all traffic being moved to the first B channel) and the voice call will be received. If disabled, both B channels will continue their data transmissions uninterrupted and the voice call will be ignored.
•State – Enables or disables the ISDN port.
Network Configuration
IP protocol configuration and static routes are configured in the Network
Configuration sub-menu. This menu is shown below:
Select IP Configuration and the following screen opens:
