D-Link DI-206 manual System Restart

DI-206 ISDN Remote Router

This is the same Software Update configuration information contained in the Software Update section in the “PROM System Configuration” chapter. The parameters are described in that section.

Perform a System Restart after configuring these settings begins the software update procedure.

System Restart

The system restart function enables you to reset the DI-206 without powering off. Some setting changes require a system restart in order for them to take effect.

A system restart will not affect the router’s settings, but will clear all tables including the routing table and all SNMP counters and tables. It is also used to initiate a software update.

81