DSL-302T ADSL Modem User’s Guide

Network Connections

Network connections are provided through the ADSL port, the Ethernet port and the USB port on the back of the Modem. See the Rear Panel diagram above and the illustrations below for examples. See Installing the USB Driver above for a description of the USB driver installation procedure.

Connect ADSL Line

Use the ADSL cable included with the Modem to connect it to a telephone wall socket or receptacle. Plug one end of the cable into the ADSL port (RJ-11 receptacle) on the rear panel of the Modem and insert the other end into the RJ-11 wall socket. If you are using a low pass filter device, follow the instructions included with the device or given to you by your service provider. The ADSL connection represents the WAN interface, the connection to the Internet. It is the physical link to the service provider’s network backbone and ultimately to the Internet.

Connect Modem to Ethernet

The Modem may be connected to a single computer or Ethernet device through the 10BASE-TX Ethernet port on the rear panel. Any connection to an Ethernet concentrating device such as a switch or hub must operate at a speed of 10/100 Mbps only. When connecting the Modem to any Ethernet device that is capable of operating at speeds higher than 10Mbps, be sure that the device has auto-negotiation (NWay) enabled for the connecting port.

 

 

 

In order to connect the Modem to an Ethernet LAN, it is necessary to install

 

 

 

 

 

 

 

 

3rd-party PPP connection software on any system used to access the Internet.

 

Note

 

 

 

 

 

 

 

 

 

 

Use standard twisted-pair cable with RJ-45 connectors. The RJ-45 port on the Modem is a crossed port (MDI-X). Follow standard Ethernet guidelines when deciding what type of cable to use to make this connection. When connecting the Modem directly to a PC or server use a normal straight-through cable. You should use a crossed cable when connecting the Modem to a normal (MDI-X) port on a switch or hub. Use a normal straight-through cable when connecting it to an uplink (MDI-II) port on a hub or switch.

The rules governing Ethernet cable lengths apply to the LAN to Modem connection. Be sure that the cable connecting the LAN to the Modem does not exceed 100 meters.

Computer to Modem Connection

Connect the Modem directly to a 10/100BASE-TX Ethernet port on a PC or notebook computer using the Ethernet cable provided as shown in this diagram.

8

Page 21 Page 23
Page 22
Image 22
D-Link DSL-302T user manual Network Connections, Connect Adsl Line, Connect Modem to Ethernet, Computer to Modem Connection
Page 21 Page 23

DSL-302T specifications

The D-Link DSL-302T is a highly regarded ADSL modem that has become a popular choice for both home and small office users. Known for its reliability and ease of use, this modem is designed to provide high-speed internet access over traditional telephone lines, making it an ideal solution for users who need robust connectivity without the complications of more advanced networking setups.

One of the key features of the DSL-302T is its support for ADSL2 and ADSL2+ technologies. These advancements enable the modem to deliver faster speeds and improved performance over longer distances compared to traditional ADSL. With data rates of up to 24 Mbps downstream and 1 Mbps upstream, users can enjoy seamless streaming, online gaming, and smooth browsing experiences.

The DSL-302T is equipped with an Ethernet port, allowing users to connect directly to a computer or to a router for sharing the internet connection with multiple devices. This flexibility makes it suitable for both individual users and those who want to set up a more extensive home network.

In terms of installation, the D-Link DSL-302T is designed for user-friendliness. It comes with a straightforward setup wizard that guides users through the configuration process. This ease of installation means that even those with limited technical expertise can have the modem up and running in no time.

Security is another crucial aspect of the DSL-302T. It incorporates features such as NAT (Network Address Translation) and a built-in firewall to protect users' networks from external threats. It also supports PPPoE, which is essential for connecting to many ISPs.

The modem’s design is compact and lightweight, allowing for easy placement in any environment. It also operates quietly, which is an advantage for home users who prefer a serene atmosphere.

Overall, the D-Link DSL-302T combines speed, reliability, and security, making it a solid choice for anyone seeking a dependable ADSL modem. Its support for modern ADSL technologies, ease of installation, and robust security features make it suitable for a variety of internet usage scenarios. With D-Link's reputation for quality and customer support, the DSL-302T remains a relevant option for users looking to enhance their internet experience.
Top Page Image Contents