| Using the AP Manager | |
|
|
|
Device Configuration > Multi-SSID (continued)
Master SSID:
Guest SSID: Security:
VLAN Group ID:
Select HEX or ASCII.
Select 64, 128, or
Select the 1st through the 4th key to be the active key. Enter key here.
If you configure Enable Guest Access, and configure Internal and Guest networks on VLANs, this field will be enabled.
Provide a number between 1 and 4094 for the Internal VLAN.
This will cause the access point to send DHCP requests with the VLAN tag. The switch and the DHCP server must support VLAN IEEE802.1Q frames. The access point must be able to reach the DHCp server.
Check with the Administrator regarding the VLAN and DHCP configurations.
79 |
