| Using the AP Manager | |
|
|
|
Device Configuration > DHCP Server
DHCP Server:
Dynamic Pool
Settings:
Static Pool
Settings:
IP Assigned From:
Range of Pool (1~255): SubMask:
Gateway:
Wins:
Enable or disable the DHCP server function.
Click to enable Dynamic Pool Settings. Configure the IP address pool in the fields below.
Click to enable Static Pool Settings. Use this function to assign the same IP address to a device at every restart. The IP addresses assigned in the Static Pool list must NOT be in the same IP range as the Dynamic Pool.
Enter the initial IP address to be assigned by the DHCP server.
Enter the number of allocated IP addresses.
Enter the subnet mask.
Enter the gateway IP address, typically a router.
Wins (Windows Internet Naming Service) is a system that determines the IP address of a network computer with a dynamically assigned IP address, if applicable.
76 |
