D-Link DWL-2700AP manual Master Ssid, Key Type Key Size

DWL-2700AP User’s Manual Using the Configuration Menu

Advanced > Multi-SSID (continued)

Master SSID:

Guest SSID: Security:

Key Type:

Key Size:

Key:

VLAN Group ID:

The Master SSID and Security can not be changed here. Those values follow the settings in Home>Wireless.

When you Enable Guest SSID you can name each guest SSID.

The Security options for these three Guest SSIDs are Open System or Shared Key.

Select HEX or ASCII.

Select 64, 128, or 152-bits

Select the 1st through the 4th key to be the active key. Enter key here.

If you configure enable Guest access and configure Internal and Guest networks on VLANs, this field will be enabled.

Provide a number between 1 and 4094 for the Internal VLAN.

This will cause the access point to send DHCP requests with the VLAN tag. The switch and the DHCP server must support VLAN IEEE802.1Q frames. The access point must be able to reach the DHCP server.

Check with the Administrator regarding the VLAN and DHCP configurations.

Note: Security Setting Limit:

When the Primary SSID is set to use one key index for WEP, you can use 3 other key indexes for Guest SSIDs.

If the Primary SSID is set to 802.1x, WPA/WPA2-EAP, WPA/WPA2-PSK, WPA-Auto-EAP, or WPA-Auto-PSK, you can only use No Security for guest SSIDs.

D-Link Systems, Inc. 44