6
Connections Reset Button – press this button to revert to the factory default settings of
the DWL-810
Power Receptor – connect one end of the included 5V DC Power Adapter
into the power receptor on the DWL-810 and connect the other end of the
Power Adapter to a power outlet.
Default Settings Operating Mode Ad-Hoc
SSID default
Channel 6
Transmission rates Auto
Encryption Disabled
IP Address 192.168.0.30
IP Subnet 255.255.255.0
User Name Admin (all lower case)
Password None (leave field blank)
Ethernet Port
Reset Button
Power Receptor
Category 5 is the most reliable grade of twisted-pair cable. It is either Straight-
Through cable or Cross-Over cable. Always check your installation instructions
to make sure that you have selected the correct type of Category 5 cable.
For the DWL-810, you will use Cross-Over cable to connect to a computer
for configuration and to connect to any device with an Ethernet adapter.
Use a Straight-Through cable to connect the DWL-810 directly to a switch.
Ethernet Port – an RJ-45 jack
provides connection to a network
device using a Cat 5 Ethernet
cable. (Use the included
Cross-Over CAT5 cable when
connecting to another Ethernet
adapter, like the port in a gaming
console; use a Straight-Through
CAT5 cable when connecting to a
switch.)