Connecting the DWL-G810 to your Ethernet-enabled device

A. First, connect the power adapter to the receptor at the back panel of the DWL- G810 and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation.

B. Insert one end of an Ethernet cable (included) to the Ethernet port on the back panel of the DWL-G810 and connect the other end to the Ethernet port located on the device (e.g., a Set Top Box, Gaming Console, laptop or desktop computer, or network printer.) The LED light will blink when there is data tranfer through the wireless connection. (Note: The Ethernet port on the DWL-G810 is Auto-MDI/ MDIX. Meaning you can use a straight-through or crossover-cable to the Ethernet Port.)

C. The antenna is used by the DWL-G810 to connect to other 802.11b/g wireless devices.

A. Receptor for

Power Adapter

C. Antenna

Used to wirelessly connect to 802.11b/ g networks.

B. LAN Port

This is the connection for Ethernet cables to your Ethernet-enabled device.

2

Page 2
Image 2
D-Link DWL-G810D-Link warranty Connecting the DWL-G810 to your Ethernet-enabled device