Minolta 2163-910 102 103, Canceling Wireless/Remote Flash Mode, Imprinting the Date or Time

9222-2163-11 MM-B108 (E).qxd 01.8.3 16:11 Page 102

WIRELESS/REMOTE FLASH

Canceling Wireless/Remote Flash Mode

1 Attachera. the flash to the cam-

• The camera and flash should be on.

FOR OWNERS OF THE QUARTZ DATE MODEL

The quartz-date function lets you record the date or time on the lower-left corner of the photograph. The quartz data back has an automatic calendar through the year 2039.

•Imprinted data may be difficult to read if the lower-left corner of the photograph is bright or non-uniform.

•Do not use the data back when temperatures are outside the range of 0° to 50°C (32° to 122°F).

•Since the date is recorded when the film is advanced to the next frame, sometimes the last frame of the roll will not have the date printed on it.

2 Turn the function dial to .

Date button Select button

3 While pressing the function			Imprinting the Date or Time
button, turn the control dial			1	Press the date button to
until	and	appear
on the camera’s data panel.				choose the date imprinting
				format.
			•	The display changes as follows:

4 Detach the accessory flash.

DETAILED OPERATION

•Turning off the main switch of the camera with the accessory flash attached also cancels wireless flash. If the flash is not attached, the flash’s wireless/remote function will not be canceled. If this happens, see the flash’s instruction manual to cancel the function.

2 Press the shutter-release button to set the format.

102 103