Exposure AE-LOCK, Spot-AE Lock | Minolta 2163-910, 2084401 manual

9222-2163-11 MM-B108 (E).qxd 01.8.3 16:11 Page 78

EXPOSURE – AE-LOCK

Spot-AE Lock

Spot metering uses only the center honeycomb segment shown by the spot metering area in the viewfinder. You can lock the metered exposure without locking the focus. With a high or low key subject, an object away from the subject can be used to set the shutter speed and aperture. The exposure remains locked until the spot AE lock button is released.

1	Place the spot metering area
	on the area to be metered.

• Make sure the light falling on the

	metered area is the same as the light
	falling on the subject.
Spot metering area
2 Press and hold the spot AE
	lock button.
•	will be displayed in the
	viewfinder to indicate the exposure
	is locked.
Spot AE lock button

•When using flash. pressing the spot-AE lock button sets the flash mode to slow-sync (p.96).

3	While pressing the AE-lock
	button, recompose the

scene.

• The Ev scale will show the difference in relative brightness between the metered area and the object in the spot metering area (p. 80).

Ev Scale

4	While still pressing the AE-
	lock button, press the

shutter-release button all the way down to take the picture.

DETAILED

OPERATION

Spot-AE lock button

•If the spot AE-lock button is not released after taking the picture, the exposure setting will remain locked.

•Slow-sync is activated when appears in the viewfinder (p.96).

Custom Function Notes

Cust-10: Spot-AE lock: activated when the AE lock button is pressed and held (1), or activated when the button is pressed once and then canceled when it is pressed again (2) (p.112).

78

79

Image 40

Minolta 2163-910, 2084401, 9222-2163-11 instruction manual Exposure AE-LOCK, Spot-AE Lock

Contents

Appendix Table of Contents Table of Contents Detailed Operation For Proper and Safe USE For Proper and Safe USE Quick Operation Names of Parts Body Data Panel Names of PartsViewfinder Strap Using the Eyepiece CapAttaching the Strap Battery Condition Indicators Installing the BatteriesBatteries Lens Attaching the LensLens caps Removing the Lens Film Film-chamber Lock Gently press the manual- rewind button using a pen Rewinding the FilmWait until the film is Completely rewound Handling the Camera EYE-START Pressing the Shutter-release ButtonTurning Eye-start on Turn the function dial to Audio Signal Canceling Eye-startCanceling the Audio Signal Turning the Audio Signal On Taking Pictures in FULL-AUTO Focus Signals FocusSpecial Focus Situations Focus cannot be confirmed Blinking Using the BUILT-IN Flash Flash SignalsFocus Lock Center your subject in the wide Focus frame Using the BUILT-IN Flash Flash CancelFlash Range Lens Shadowing Canceling Red-eye Reduction When you release the button,Red-Eye Reduction Until Appear on Data panel Portrait SUBJECT-PROGRAM SelectionLandscape Close-up SUBJECT-PROGRAM SelectionSports Night Portrait Photograping Night Scenes Drive Modes Self-timerCenter your subject in the focus frame Continuous Adavance Drive ModesFor Owner’s of the Remote-control Model Focus Lock in Remote Control Mode Shutter-release buttonRecompose the picture Lift your finger from Aperture Control Shutter Control Mode Aperture Priority Exposure Modes Mode Aperture Priority Flash with a ModeCanceling the Flash Press the flash-mode button to pop-up the built-in flash Mode Shutter Priority Depth-of-field PreviewControl dial until S appears Select the shutter speed Mode Shutter Priority Mode ManualFlash with S Mode Flash with M mode Mode ManualEv Scale in the Viewfinder Mode Control dial to change Shutter speeds Exposure Warnings Bright LightLow Light Taking Time Exposures p.81 Multiple Exposures p.90 Wide Focus Area Focus AreaSpot Focus Area Focus Area Local Focus Areas Automatic AF Continuous AF Focus ModesAppears on the data Single-Shot AF Focus ModesManual Focus AF Illuminator Segment Honeycomb-Pattern MeteringSpot Metering Subject in the center Subject on the right Exposure AE-LOCK Spot-AE Lock Ev Scale Display When Using the Spot-AE Lock Mount the camera on a tripod. Set the camera to M mode p.61Exposure AE-LOCK With the object to be metered Using the Remote-Control with BulbSold Separately Attaching the Remote Cord Sold Separately Exposure Compensation Checking Exposure Compensation Setting the ISO Manually Exposure BracketingTo set the bracketing Increment Exposure Bracketing Multiple Exposure Stop From blinkingRepeat 4 and 5 for each Additional exposure Down to take the last Canceling Multiple Exposure FlashMultiple Exposure Metering Multiple Exposure Attaching the Accessory Flash FlashFlash Metering Pre-flash metering Attach the accessory flash to Slow SyncHIGH-SPEED Sync HSS High-speed sync HSS WIRELESS/REMOTE Flash Setting Wireless/Remote Flash ModeNormal flash Wireless flash With the camera and flash on Turn the function dial to WIRELESS/REMOTE Flash Taking Pictures in Wireless/Remote Flash ModeWireless/Remote Ratio Flash 100 101 102 103 Canceling Wireless/Remote Flash ModeImprinting the Date or Time Setting the Date or Time 104 105For Owners of the Quartz Date Model Changing the Date Format Setting Custom Functions Custom Functions106 107 Turn the function dial to any Position other than Cust 108 109 Custom Functions Custom 8 P Mode Settings 110 111Custom 6 Focus-hold Button Lens Custom 7 Eyepiece Sensor Activation 112 113 Following settings will not change PROGRAM-RESET Button114 115 Accessory Information Accessory Flashes116 117 Lenses Accessory Information 118 119 Trouble Shooting 120 Care and Strage 122 123 Specifications 124 125 126 127 IndexSubject MM-B108