Minolta 2084401, 2163-910, 9222-2163-11 instruction manual Attaching the Remote Cord Sold Separately

9222-2163-11 MM-B108 (E).qxd 01.8.3 16:11 Page 82

TAKING TIME EXPOSURES (buLb)

3 While pressing the exposure- compensation button, turn the control dial to select the aperture.

Exposure-

compensation

button

Control dial

4 Compose the scene and focus on your subject.

• If the scene is too dark for the autofocus to operate, press the focus-mode switch and focus the lens manually (p. 75).

Focus-mode switch

Attaching the Remote Cord (Sold Separately)

To reduce the camera shake or for long exposures, the shutter can be released with the Remote Cord RC-1000S or RC-1000L.

•Do not use the Wireless Controller IR-1N with this camera. Its use may permanent damage the camera.

1	Open the remote-control-
	terminal cover.
2	Insert the plug into the
	terminal.
•	When removing the Remote Cord
	RC-1000S or RC-1000L, take care
	not to pull out the remote-terminal
	cover with the Remote Cord.
• The Remote-cord Clip (sold
	separately) can be used to attach
	the remote cord to the camera

5 Firmly press the eyepiece

cap into the eyepiece.

•The eyepiece cap prevents light from entering through the viewfinder and fogging the film.

			strap.	DETAILED OPERATION
Using the Remote-Control with Bulb(Sold Separately)
To reduce camera shake, use the optional remote-control IR-3. (sold
separately) (p.49).
		1	Set the camera to remote-
			control mode (p.49).
	Emitter window

6 Press and hold the shutter- release button to take the picture.

• The shutter remains open as long as

the button is pressed.

Delayed button

Release button

2	Press the release button to
	open the shutter.

•Hold the remote control near the sensor on the grip. Take care not to stand in front of the lens.

3	Press release button again
	to close the shutter.

83