9222-2163-11 MM-B108 (E).qxd 01.8.3 16:11 Page 94

FLASH

Attaching the Accessory Flash

The accessory flash units fit in the shoe located on the top of your camera.

Flash Metering

Flash metering changes according to the flash unit and lens being used. The metering mode also changes when the HSS mode on the flash is turned on or off.

 

D lens and

D lens and

Other lens

Other lens

 

HSS on

HSS off

and HSS on

and HSS off

 

 

 

 

 

5600HS(D)

ADI metering

ADI metering

Pre-flash

TTL metering

3600HS(D)

with pre-flash

without pre-flash

metering

 

 

 

 

 

 

5400HS

Pre-flash

TTL

Pre-flash

TTL metering

metering

metering

metering

 

 

 

 

 

 

 

Built-in

ADI metering

TTL metering

flash

without pre-flash

 

 

 

 

 

 

 

 

Other

TTL metering

TTL metering

flashes

 

 

 

 

 

 

 

 

 

For more information on HSS (high-speed sync) flash mode, see page 97.

When an off-camera cable or bounce flash is used, the TTL metering mode will be automatically set.

If Wireless/Remote flash is used, the TTL metering mode will be automatical- ly set.

TTL metering (Through The Lens):

The TTL flash metering system controls the flash during the exposure automatically.

Pre-flash metering:

In combination with TTL metering, a pre-flash fires before the main exposure. The pre-flash is metered with 14 segment honeycomb pattern and fed back to the flash exposure sys- tem to determine the reflectance of the scene.

ADI metering (Advanced Distance Integration):

Flash metering is controlled by distance information from D series lenses in addition to TTL metering. With the 5600HS

(D)and 3600HS (D) accessory flash units, a pre-flash is also used. With ADI metering, flash output is less influenced by background conditions or the subject’s reflectance.

Use of a Flash/Color Meter with Pre-Flash

When pre-flash fires, a flash/color meter cannot meter accurately. This

 

 

is because the purpose of pre-flash is to assist ADI/Pre-flashmetering,

 

 

not to provide illumination for the picture. Cancel HSS (see flash man-

 

 

DETAILED

OPERATION

ual) or eliminate the influence on metering using Custom 12-2 (p.

 

 

113). However, if you use the test-flash button on the flash, the pre-

 

 

flash will not fire.

 

 

When Using a Close-up Diffuser, Certain Filters and Lenses

 

 

 

 

When close-up diffuser CD-1000, or a filter whose stop’s increase is

 

 

not 0 (i.e., ND) is used, or when the focus-range limiter or macro release

 

 

of certain lenses are used, the proper exposure will not be obtained by

 

 

ADI or Pre-flash metering.

 

 

94

95

Page 48
Image 48
Minolta 2084401, 2163-910, 9222-2163-11 Attaching the Accessory Flash, Flash Metering, Pre-flash metering