Care and Cleaning
Replacing the Light Bulb(s)
warning
•To prevent electrical shock and/or personal injury, make certain that the oven and the light bulb are cool and that power to the oven has been turned off at the circuit breaker panel or fuse box before replacing a light bulb.
•Always make sure the lens cover is in place when using the oven. The lens cover protects the light bulb from breakage caused by high oven temperatures or mechanical shock.
•Replacing the lens cover without lining up the
•Do not use a screwdriver to remove the lens cover.
important
Do not touch the replacement halogen light bulb with your fingers. Halogen bulbs are sensitive to the oils from your hand. The oils from your hand will stick to the bulb and may cause it to burn out faster than normal.
Light bulb replacement is considered to be a homeowner maintenance operation. If the lights do not work, before replacing them, please consult the Problem Solution Guide on page 28.
4.Grasp the old bulb and pull it straight out of the socket.
5.Using a glove, insert the new bulb into the socket.
Light
bulb
Light socket
Cutout on inside rim of lens
6.As you reinstall the lens cover, line up the cutout on the inside rim with the light socket. Gently press it into its original position.
To replace a light bulb:
1.Replace the light bulb(s) only with Dacor part number 100429. See the facing page for ordering information
2.Turn off power to the oven at the circuit breaker panel or fuse box.
3.Hold your hand under the lens for support and pry it loose using a spatula or table knife. Pull the lens cover straight out.
7.Turn the power to the oven back on.
8.Reset the clock (see page 8).
27
