Dacor Cabinet Layout

Installation Specifications

Cabinet Layout

•Any openings in the wall behind the appliance or in the floor underneath it must be sealed.

WARNING

• If cabinet storage space is to be provided directly

above the range, the risk of personal injury may be

Failure to meet or exceed the maximum and minimum

reduced by installing a ventilating hood that projects

dimensions/clearances stated may result in a fire hazard.

horizontally a minimum of 5 inches beyond the face of

•

Carefully check the location where the range is to be

the cabinets.

installed. For best performance, the range should be

10” Min. (254mm)

placed away from drafts that may be caused by doors,

non comubustible

to any combustibles

windows and heating and air conditioning outlets.

above counter both sides

rear wall recommended

•

To reduce the risk of personal injury and to reduce

accumulated smoke in the room, Dacor strongly

recommends installing a range hood. A range hood

35 1/4” (895 mm)

24”

countertop opening

should project horizontally a minimum of five (5) inches

36” (914 mm)

(610mm)

beyond the face of the cabinets. If installing a range

cabinet opening

below countertop

hood, see the range hood specifications for minimum

Cabinet face

clearances in addition to those stated below.

below countertop

Notch countertop

•

The range may be installed flush to the rear wall. Dacor

overhang to width

of

cabinets

Countertop overhang

recommends installing a non-combustible material on

Countertop Height: Min: 35 1/2” (902 mm)

2 1/8” (54 mm) Max.

the rear wall above the range and up to the vent hood.

Max: 37 5/8” (956 mm)

Countertop Thickness: Max: 1 5/8” (41mm)

It is not necessary to install non-combustible materials

Self-Rimming Cutout Dimensions -

behind the range below the countertop height.

Cabinet Depth Exactly 24 Inches5

•

Regardless of the type of back wall surface,

10” Min. (254mm)

rear wall or

the range must not be installed

to any combustibles

3/4” Min. (19mm)

countertop edge

or operated without the

above counter both sides

Countertop overhang

backguard in place.

B

35 1/4” (895 mm)

countertop opening

24

1/8”

36” (914 mm)

(613mm)

cabinet opening

below countertop

Cabinet face

below countertop

Notch countertop

overhang to width

of

13” (330mm)

cabinets

Countertop overhang

Max.4

Countertop Height: Min: 35 1/2” (902 mm)

2 1/8” (54mm) Max.

Max: 37 5/8” (956 mm)

Countertop Thickness: Max: 1 5/8” (41mm)

Top of

Self-Rimming Cutout Dimensions -

Non-combustible

finished

Cabinet Depth Greater Than 24 Inches5

surface along

back wall

counter

5 Model ER36GI only. Included self-rimming trim kit

recommended

allows trim to overlap countertop.

30” (762mm)

A

10” (254mm Min.

18” (457mm)

Min.1

to combustible side

Min.1, 4

walls above the range

(both sides)

A6

B

C

36” minimum

36” (914 mm)

37 1/8” (943 mm)

Suggested

(914 mm)

minimum

maximum

Note 2

location of

6 See cutout dimensions above for self-rimming installations.

utilities3

1Vertical to combustible surface from range grate level; if installing an overhead vent hood, also check the hood specifications for minimum required clearances.

C	2		Cabinet/countertop depth is at discretion of customer
		but cabinet face SHALL NOT protrude further than rear
		of front panel. See product dimesions.
	3		Consult local code for exact location requirements.	All tolerances: +1/16”, -0 (+1.6, -0 mm)
	4		Not applicable for cabinets more than a horizontal	unless otherwise stated
		distance of 10” (254mm) from the edge of the range.
	Cabinet Cutout Dimensions

5