Installation Specifications

Gas and Electrical Locations

•The installation must allow for the following:

◊Access to the gas shut-off valve when the unit is installed.

◊Access to the electrical outlet, when the range is in place.

◊The gas supply piping, gas shut-off valve and the electrical junction box or receptacle must be located so they do not interfere with the range when it is installed.

◊The electrical outlet and gas shut off valve must be located so that the range can be pulled out for service while the appliance remains connected.

•Both the gas supply piping and shut-off valve and the electrical outlet must be located so they do not interfere with the range when it is installed.

•Existing utility connections may be used for replacement purposes, provided they meet local code and fit within the utility clearance area at the back of the range (see diagram, right).

121/2” (318 mm)

 

C

15”(381 mm)

 

 

 

L

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12” (305mm)

2 1/2”

 

(64mm)

1” (25mm)

3 1/2” C (89mm) L

Utility Clearance Behind Range

Installation Instructions

Verifying the Package Contents

Unpack the range and verify that all required parts have been provided. If any item is missing or damaged, please contact your dealer immediately. Do not install a damaged or incomplete appliance. The customer must report cosmetic issues immediately to the dealer or builder.

WARNING

•Observe all governing codes and ordinances during planning and installation. Contact your local building department for further information.

•If the gas or electric service provided does not meet the product specifications, do not proceed with the installation. Call the selling dealer, the gas supplier or a licensed electrician.

•This appliance must be installed by a licensed plumber or gas fitter when installed within the Commonwealth of Massachusetts.

Parts List

•Anti-tip bracket

•Grates (2) 12 inch, (1) 10 inch

•Use and care manual

•Ignitor cleaning brush

•Lens pry stick

•Stainless steel cleaner

•Dual burner rings (2)

•Outer dual burner caps (2)

•Inner dual burner caps (2)

•Standard burner caps (2) large, (2) small

•Standard burner rings (2) large, (2) small

•Oven racks (3)

The following parts are are included with model ER36GI only. They are for use with self-rimming installations:

•3 Self-rimming trim pieces (left, right, rear)

•2 Self-rimming side panels (left, right)

•13 #8 x 1/4 Torx screws

See the use and care manual for a list of other optional accessories and parts.

6