Other Features

Micro Warm

Micro Warm allows you to keep food warm up to 30 minutes.

Direct Use

1. Touch the MICRO WARM pad.

ENTER

 

TIME

 

UP TO

 

30

 

MINUTES

 

 

 

 

 

 

 

 

 

2.Enter desired time by touching the number pads. To enter 30 minutes, touch 3000.

30.00 TOUCH START

3.Touch the START/EASY MINUTE pad.

The Microwave In-A-Drawer™will start. The display will show 30.00 and count down. KEEP WARM will be displayed intermittently during the count down.

With Manual Cooking

1.Enter desired cooking time and power level.

2.Touch the MICRO WARM pad.

3.Enter desired warming time up to 30 minutes.

4.Touch the START/EASY MINUTE pad.

The operation will start. When the cooking time is com- plete, a long tone will sound and Micro Warm will start. The display will count down. KEEP WARM will be displayed intermittently during the count down.

NOTE:

•If you attempt to enter more than 30 minutes for Mi- cro Warm, an error message will appear in the display.

•Micro Warm cannot be programmed with Sensor Pop- corn, Sensor Reheat, Sensor Cook, Defrost or Reheat.

Help

Each setting of Sensor Reheat, Sensor Cook, Sensor Popcorn, Micro Warm, Reheat and Defrost has a cooking hint. If you wish to check, touch SET UP/HELP whenever HELP is lighted in the Interactive Display for these and other manual operation hints.

Multiple Sequence Cooking

Your Microwave In-A-Drawer™can be programmed for up to 4 automatic cooking sequences, switching from one power level setting to another automatically.

Sometimes cooking directions tell you to start on one power level and then change to a different power level. Your Microwave In-A-Drawer™can do this automatically.

1.First enter cooking time. Then touch the POWER LEVEL pad once for 100% cooking or repeat touching the POWER LEVEL pad for a lower power level.

2.Enter second cooking time. Repeat touching the POWER LEVEL pad for desired level. You can follow this procedure up to 4 times. TOUCH START

3.Touch START/EASY MINUTE pad.

NOTE:

•If the POWER LEVEL pad is touched once, HIGH will be displayed.

•If 100% is selected as the final sequence, it is not necessary to touch the POWER LEVEL pad.

•If you wish to know the power level during cooking, simply touch the POWER LEVEL pad. As long as your finger is touching the POWER LEVEL pad, the power level will be displayed.

•Micro Warm can be programmed even if 4 cooking sequences have been set.

Easy Minute

Easy Minute allows you to cook for a minute at 100% by simply touching the EASY MINUTE pad. You can also extend cooking time in multiples of 1 minute by repeatedly touching the EASY MINUTE pad during manual cooking.

NOTE:

•To use Easy Minute, touch the pad within 3 min- utes after cooking, closing the door or touching the STOP/CLEAR pad.

•Easy Minute cannot be used with Sensor settings, Reheat or Defrost.

More Or Less Time Adjustment

Should you discover that you like any of the Sensor, Reheat or Defrost settings slightly more done, touch the POWER LEVEL pad once after touching your selection. The display will show MORE .

For slightly less done, touch the POWER LEVEL pad twice after touching your selection.

The display will show LESS .

Setup/Help

If the electrical power supply to your Microwave In-A- Drawer™ should be interrupted, the display will intermit-

tently show ENJOY YOUR MICRO- WAVE TOUCH

CLEAR AND TOUCH CLOCK after the power is rein- stated. If this occurs, the SETUP/HELP option you input will be erased. Simply touch the STOP/CLEAR pad and reset.

E13