Before Operating

Before operating your new Microwave In-A-Drawer™make sure you read and understand this operation manual completely.

•Before the Microwave In-A-Drawer™can be used, follow these steps:

1. Plug in the Microwave In-A-Drawer™. ENJOY YOUR

MICRO- WAVE TOUCH CLEAR AND TOUCH

CLOCK will appear.

2.Touch the STOP/CLEAR pad. : will appear.

3.Set clock.

To Set The Clock

1.Touch the TIMER/CLOCK pad and number 2.

2.Touch the number pads for correct time of day and touch the TIMER/CLOCK pad again.

This is a 12 hour clock. If you attempt to enter an incorrect clock time, ERROR will appear in the display. Touch the

STOP/CLEAR pad and re-enter the time.

•If the electrical power supply to your Microwave In-A-Drawer™should be interrupted, the display will intermittently show ENJOY YOUR MICRO- WAVE

TOUCH CLEAR AND TOUCH CLOCK after the

power is reinstated. If this occurs during cooking, the program will be erased. The time of day will also be erased. Simply touch the STOP/CLEAR pad and reset the clock for the correct time of day.

NOTE:

•The Microwave In-A-Drawer™can be programmed with the drawer open except for Start/EASY MINUTE.

Timer

1.Touch the TIMER/CLOCK pad and number 1.

2.Enter time.

3.Touch the TIMER/CLOCK pad again.

4.To cancel timer, touch the STOP/CLEAR.

Stop/Clear

Touch the STOP/CLEAR pad to:

1.Erase if you make a mistake during programming.

2.Cancel timer.

3.Stop the Microwave In-A-Drawer™temporarily during timed cooking.

4.Return the time of day to the display.

5.Cancel a program during cooking, touch twice for timed cooking.

Open Or Close Drawer

Always press the OPEN or CLOSE pad on the control panel to open or close the Drawer.

Do not push or pull the Drawer by hand, except in case of emergency, such as a power failure. If necessary, push or pull slowly.

E7