Care and Cleaning

Light Bulb Replacement

warning

• To avoid an electrical shock and fire hazard, be sure

to disconnect the outdoor grill power cord from the

electrical outlet and close the gas shut-off valve when

replacing the light bulb(s).

• To avoid personal injury, make sure the outdoor grill

and the light bulb(s) are cool before replacing the

light bulb(s).

• Always make sure the lens covers are in place when

To replace a light bulb, follow these steps:1.Replace the light bulb only with Dacor part number100429. See the page 22 for ordering information.2.Disconnect the outdoor grill power cord from the elec- trical outlet.

3.Hold your hand under the lens for support and gently pry it loose using a spatula or table knife. Pull the lens cover straight out.

4.Grasp the old bulb and pull it straight out of the socket.5.Using a glove, insert the new bulb into the socket.

 

using the outdoor grill. The lens covers protect the

 

bulbs from breakage.

•

Replacing the lens cover without lining up the cutout

 

with the light socket will damage the light fixture.

•

Do not use a screwdriver to remove the lens.

Light bulb replacement is considered to be a homeowner maintenance operation. Your outdoor grill has halogen lights to enhance the view inside the canopy. Each light assembly consists of a removable lens cover and a 20 Watt 12 Volt halogen bulb, as well as the light fixture

6.To reinstall the lens, first line up the lens and the light fixture, with the cutout toward the bottom. Gently press the lens into its origi- nal position.

7.Reconnect the power cord.

Lens cutout

Back of Lens

housing. If the light does not work, before replacing it, please consult the Problem Solution Guide on page 23.

important

To increase bulb life, use a glove when handling the bulb. Oils from your hand may reduce bulb life.

Light fixture

Bulb

Light

socket

Insert with lens cutout

on bottom

Lens

Light Bulb Installation

Light Fixture Locations

20