Manuals / Daewoo / Photography / Camcorder

Daewoo 65M200, 51M200A important safety instructions Connecting a Stereo Source to INPUT1~INPUT5

Models: 51M200A 51M200 65M200

1 64

Download 64 pages 40.22 Kb

Page 16

FIRST TIME USE

CONNECTING EXTERNAL VIDEO SOURCES

CONNECTING A STEREO SOURCE TO INPUT1~INPUT5

1.Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the Projection Monitor below.

2.Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.

3.Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.

4.Press the VID4 button to view the program from the VCR or laserdisc player. The VIDEO label disappears automatically after approximately four seconds.

DVI-HDTV

R L V

NOTE: Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.

16

Image 16

Daewoo 65M200, 51M200A important safety instructions Connecting a Stereo Source to INPUT1~INPUT5

Contents

Operating Guide for 51M200, 65M200, 51M200A IndexImportant Safety Instructions Do not OpenPrevention of Screen Burn Lead NoticeAccessories First Time USEHOW to SET UP Your NEW Hitachi Projection Monitor LocationViewing BestHOOK-UP Cables and Connectors Phono ConnectorMagic Focus Front Panel ControlsFront Input Jacks Input Front Panel Jacks and Connectors Rear Panel Jacks Audio/Video Inputs 1, 2, 3Monitor OUT Audio to HI-FI OutputComponent Y-PBPRInputs DVI-HDTV Input InputTypical FULL-FEATURE Setup First Time USE Rear Panel ConnectionsTips on Rear Panel Connections Connecting External Audio Devices Rear Panel of Projection MonitorConnecting External Video Sources Before Operating External Video SourceConnecting a Monaural Audio Source to INPUT1~INPUT5 Connecting a Stereo Source to INPUT1~INPUT5 Connecting AN S-VIDEO Source to Input 3, 4 DVI-HDTV Connecting a Component Source to Input 1 or 2 Y-PBPR Remote Control Remote ControlHOW to USE the Remote to Control Your Projection Monitor Power buttonPICTURE-IN-PICTURE buttons DAY/NIGHT buttonAntenna button Satellite Receiver SAT Mode Only VOLUME, Mute buttonVID1 ~ VID5 Size button Sleep button Info buttonExit button ButtonPICTURE-IN-PICTURE PIP POP Mode PICTURE-IN-PICTUREPIP button Split Mode PICTURE-IN-PICTURE PIP Mode buttonSwap button SplitFreeze button With PIP on Freeze button with PIP OFFPOP SUB Freeze with PIP OFF Split FREEZEwith PIP OFFUsing the Remote to Control VCR Functions Operating the precoded function for your VCRDVD/VCR Button Precoded VCR ButtonsUsing the Remote to Control CABLE/SATELLITE BOX Functions Cable CBL/SAT ButtonPrecoded CABLE/SATELLITE BOX Buttons RemoteOperating the precoded function for your DVD player Using the Remote to Control DVD FunctionsPrecoded DVD Buttons ON-SCREEN Display OSD Video Picture Mode VideoContrast ANT A/BColor Management Reset Video SettingsPure depending on the user’s preference Auto Movie Mode Color DecodingAuto Color Noise ReductionAudio TrebleTechnology Aspect Mode AspectAuto Aspect Vertical PositionLocks LocksMovie Ratings TV Ratings Eng Canadian RatingsCanadian Ratings English Table Frn Canadian Ratings French Table+ General Not recommended for young Programming is not suitable for childrenSetup Auto Digital Convergence Adjustment Magic Focus Tune UpManual Convergence Adjustment Mode To Move Adjustment PointTo Change the Color of Adjustment Point To Adjust the ConvergenceMenu Preference Menu PreferenceMenu Background Set The ClockSet The Inputs Set The Color System Set Virtual HD Set Black Side PanelSet Closed CaptionChannel About Your TVCare of Your Aspect Projection Monitor Your Remote Control Do notReception Problems Symptoms Useful InfoInputs Dimensions 51M200 51M200AOutputs Dial Toll Free Aspect Brand ElectronicsIndex Page Page Page Page Page QR64461