Daewoo 65M200, 51M200A Front Panel Controls, Magic Focus, Front Input Jacks Input

FRONT PANEL CONTROLS

ASPECT PULL

POWER

AUDIO

VOL- VOL+ INPUT MENU

INPUT 5

S-VIDEO VIDEO L/MONO R MAGIC FOCUS EXIT SELECT

CURSOR

MENU/SELECT button

This button allows you to enter the MENU, making it possible to set Projection Monitor features to your preference without using the remote. This button also serves as the SELECT button when in MENU mode.

INPUT/EXIT button

Press this button to select the current VIDEO: 1, 2, 3, 4, 5. Your selection is shown in the top right corner of the screen. This button also serves as the EXIT button when in MENU mode.

NOTES: Your remote control does not have an INPUT button. To change to video inputs, press VID1~VID5 buttons depending on your choice (see page 22).

￿CURSOR UP/DOWN buttons

These buttons serve as the cursor down ( ) and up ( ) buttons when in MENU mode.

VOLUME level

Press these buttons for your desired sound level. The volume level will be displayed on the Projection Monitor screen. These buttons also serve as the cursor left ( ) and right ( ) buttons when in MENU mode.

POWER button/POWER LED

Press this button to turn the Projection Monitor on or off. This LED light is ON during normal operation.

MAGIC FOCUS

Use this button to automatically adjust your picture quality to optimum performance (see page 46). The Magic Focus button will not work when adjustment mode is set to manual (see page 47).

FRONT INPUT JACKS (INPUT 5)

Use these audio/video jacks for a quick hook-up from a camcorder or VCR to instantly view your favorite show or new recording. Press the INPUT button until VIDEO: 5 appears in the top right corner of the Projection Monitor screen. If you have mono sound, insert the audio cable into the left audio jack.

IR RECEIVER Sensor

When using the remote control, point it towards the IR receiver for best response.

FIRST TIME USE

7