Basic Operation
This chapter describes functions such as switching channel, volume control and basic features for watching programmes.
Using Standby
When you are not watching TV, you should set your Digital PVR to ‘Standby’.
To do this: Press [POWER(√)] to switch to STANDBY.
If you plan to leave your Digital PVR unattended for a long period, switch it off and unplug it at the mains supply. (Don’t worry - all of your settings will be saved.)
Switching Channel
You can switch the current channel using one of the following methods. 1 Press the
2Enter your desired channel numeric using the [NUMERICAL
3 Go to desired channel using the […/†] button and press the [OK] button.
Volume Control
1Press the
2 Press the [MUTE] button to switch the sound ON/OFF.
Note: The mute function will remain off after changing channels.
To switch Subtitle on/off
If the current programme provides Subtitle information, you can switch the Subtitle on or off by pressing [SUBTITLE] button.
You can select a default subtitle language by selecting SETUP - Language - Subtitle Language.
To change Audio language
If the current programme is available in multiple audio languages, you can select the language that you wish to listen to.
1 Press the [AUDIO] button to display the audio language menu.
2Select your desired audio language using the [œ/√] button and press the [OK] button.
You can select a default audio language by selecting SETUP - Language - Audio Language.
12
