Erasing a channel from memory
1
2
1 Tune to the channel you want to erase.
2 Press the ADD/ERA button on the remote control. The channel will turn from green to magenta to show it has been erased.
Changing the TV's channel memory with the menus
You can also use the menu system to add or erase channels from memory:
1Use the number buttons to tune to the channel, then press MENU.
2Use the VCHWbuttons to select SETUP and press CVOLB.
3Use the VCHWbuttons to select EDIT PROGRAM. If the channel is in memory, it will be labeled “ADD,” and the number in the corner will be green. If the channel is not in memory, it will be labeled “ERASE,” and the number in the corner will be magenta.
4Use the CVOLBbuttons to change the ADD or ERASE setting.
5Wait 7 seconds, or press MENU twice to exit.
1 | 2 | 3 | 4 |
12Chapter 3 : Operating Your TV
