Changing the TV’s Input
Normally, your TV displays the signal coming through the antenna terminal. However, if you’ve connected another component to your TV (such as a VCR) using the Audio/Video Inputs, you will want to be able to view the signal from that component. To do this, you will need to switch from the “TV” input to the “Video” input, as follows;
1With the TV turned on, Press MENU
2You will see the Main Menu, Use the VCHWbuttons to select SETUP and press
CVOLB.
3Use the VCHWbuttons to select INPUT.
4Press CVOLBto change from TV to VIDEO. Press CVOLBagain to switch back to TV.
5Wait 7 seconds to return to normal viewing, or press MENU twice.
1 | 2 | 3 | 4 |
Changing the TV’s Input with the remote control
11 You can also change the TV/VIDEO setting with the remote 
control. Press TV/VIDEO button on the remote control to 
change from TV to VIDEO. Press TV/VIDEO button again to 
switch back to TV.
Displaying the Current Channel
1 | 1 To quickly see the current channel, press RECALL. The current |
| channel will be displayed briefly. |
Chapter 3 : Operating Your TV 13
