How to change the user password code (factory default is 1234):
1.Key in the four digit user password code (factory default 1234.)
2.Press PASSWORD
3.The LCD will change to
4.Key in your new four digit user password code.
5.The LCD will change to
6.Key in your new four digit user password code again.
7.The LCD will change to acc.
Quick guide: Press 1 2 3 4 > PASSWORD > New Code > Confirm New Code
How to program the Auto Dialer to give an audible alarm as well as sending a voice message (factory default is alarm ON):
1.Key in the four digit user password code (factory default 1234.)
2.Press PROGRAM > 1 > ENTER
3.Press N (N = 0 for without audible alarm, 1 for with audible alarm). Press ENTER. Quick guide: Press 1 2 3 4 > PROGRAM > 1 > ENTER > N > ENTER
How to set the time the alarm will sound on activation (default time is 3 minutes):
1.Key in the four digit user password code (factory default 1234.)
2.Press PROGRAM > 2 > ENTER
3.Press Time (Time = 1 for one minute, 2 for 2 minutes, etc. up to 99 minutes). Press ENTER. Quick guide: Press 1 2 3 4 > PROGRAM > 2 > ENTER > Time > ENTER
8
10/15/2009 10:17:55 AM