Advanced Operations
How to program the Auto Dialer
*If no key is pressed for 30 seconds, the dialer will automatically exit the programming mode. Notice: The system must be in the OFF mode for all programming.
How to record the voice messages:
Alarm 1 = Tamper and panic alarm. Alarm 2 = PIR sensors and
1.Key in the four digit user password code (factory default is 1234.)
2.Press RECORD.
3.Press 1 (to save as the message for alarm 1) or 2 (to save as the message for alarm 2).
4.Press ENTER to start recording your 10 second message.
5.Press ENTER to stop the recording early or wait for the 10 seconds to end.
Quick guide: Press 1 2 3 4 > RECORD > 1 > ENTER, record message now
How to play back the message:
Press 1 2 3 4 > PLAY > 1 > ENTER to play back the recorded message. (Notice: 1 = the first message, 2 = the second message).
How to program phone numbers:
You can enter a maximum of nine telephone numbers for the alarms. Each number can be a maximum of 32 digits. (If you are using this Auto Dialer on an office/work phone system you may have to enter 9 before the number to get a line out.)
6
10/15/2009 10:17:55 AM
