Operating Instructions
The Controls of
Your Wine Cooler
1 | 2 | 3 | 4 | 5 | 6 |
|
7
8
1
2
3
4
Power ON/OFF Switch
Press and hold this button for approximately 3 seconds.
Interior Lights ON/OFF Switch:
When this button is pressed, the inner light is not controlled by the reed switch and will keep lighting.
Indicator light illuminates to signify that the cooling mode is currently in operation.
Display screen
For viewing the temperature of the upper zone.
5
Display screen
For viewing the temperature of the lower zone.
6°C / °F : Adjacent indicator light denotes which scale of temperature is displayed.
7“ 
” button: Used to set the temperature in the upper zone (see ‘Setting the Temperature’ below).
8“ 
” button: Used to set the temperature in the lower zone (see ‘Setting the Temperature’ below)
Setting the Temperature
I M P O R TA N T !
In the event of a power fail- ure, wait 3 to 5 minutes before restarting.
•To switch the display between the Fahrenheit (°F) and Celsius (°C)scale,depress the ‘ 
' and ‘ 
’ control
buttons simultaneously for approximately five (5) seconds.
•The temperature range can be set as low as 39°F (4°C) or as high as 64°F (18°C) to suit your specific wine storage require-
ments. Each depression of the ‘ 
’ or ‘ 
’ button
will allow you to adjust the tem- perature in 1° increments within the aforementioned range.
7
