Danby DWC408BLSST owner manual Operating Instructions Wine Storage, Function Instructions

Operating Instructions

Wine Storage

I M P O R TA N T !

•The maximum capacity of the DWC408BLSST is 146 bottles.The upper zone will hold a maximum of 66 bottles and the lower zone a maximum of 80 bottles. These capacities are based on a standard 750ml Bordeaux style bottles that are 3” in diameter. The actual capacity will be dictated by the size and shape of the bottles and may be reduced depending on these variables.

•Only store unopened, sealed bottles in the unit.

1. The upper zone

In order to achieve a maximum capacity of 66 bottles the bottles must be positioned alternately on the upper six (6) shelves as shown in Fig. D. This will allow for the storage of 11 bottles per shelf on each of the 6 shelves in this chamber.

Alternatively, the spacing between shelves is greater in the upper zone and allows for the storage of larger diameter bottles such as Pinots and Burgundies with diameters up to 3 5/8”. In order to achieve the optimum storage the bottles should be positioned alter- nately on the upper six shelves as shown in Fig. C. This will allow for the storage of up to 9 bottles per shelf for a reduced capacity of 54 bottles in this zone.

2. The lower zone

In order to achieve the maximum capacity of 80 bottles,it will be necessary to position the bottles alternately on the upper six(6) shelves,as shown in Fig.D. This will allow for the storage of eleven

(11)750ml bottles per shelf on each of the lower six (6) shelves.

The bottom two(2) shelves each carry seven (7) 750ml bottles when stocked according to Fig.E.

Fig.C

Fig.D

Fig.E

Function Instructions

Temperature Memory Function

•In the event of power loss the set temperature will be saved by the unit. Once the power is back on the unit will return the same set temperature.

NOTE

If too many bottles are put in at once or the door has not been closed tightly, the unit will display the "HI" signal at the display panel.This is normal please wait for a while after you close the door and the “HI” will disappear.

It is normal that the cabinet shows “HI” or “LO” between times, if it occurs frequently or lasts for a long time, you can restart the unit by unplugging it. If the problem occurs once again after restart, please contact the customer service.

Door Ajar Alarm Function

•If the door is not fully closed, there will be a warning alarm after 5 minutes.

Temperature Alarm Function

•If inner temperature is higher than 73°F (23°C). The “HI” is shown in display panel and the alarm will sound. It informs you that the inner temperature is too high, please check the reason why.

•If inner temperature is lower than 32°F (0°C), the “LO” is shown in display panel and the alarm will sound as well the malfunction indicator light will illuminate.

8