Dane-Elec Memory MD-H101T1E23S user manual Connect External Hard Drive

my-DittoUser Manual 83

5.The USB2 LED will turn off when the transfer is complete.

6.Your copied files can now be found in my-Ditto Public/USBCopy folder, within a folder labeled with the date and time it was created (i.e., the time of the file transfer).

IMPORTANT! Do not disconnect the external USB storage device while the USB2 LED is flashing – it can damage the transferred data.

Note: If my-Ditto server contains two (2) hard drives and the RAID function is enabled, data will be copied to Disks/Public/USBCopy.

10.3 Connect External Hard Drive

my-Ditto allows you to share your files stored on external USB hard drives.

To connect an external hard drive:

1.Connect the external hard disk drive to my-Ditto’s “USB 2” port located on the rear panel.

2.Wait until the USB2 LED is illuminated.

3.Refresh the remote view.

4.The root folder will contain External Disk folder which represent the external hard drive.

5.The external hard disk drive also appears as a Folder Share in your local network under my-Ditto’s directory.

Note: Make sure the external USB hard disk drive is connected to its power source before connecting it to my-Ditto.

Dane-Elec. All rights reserved 2010