Configuring the Base Station
Configuring the Base Station
The base charger/station may be configured in desk application to hold the reader in two different positions, either a horizontal or standing position, in order to provide the most comfortable use depending on needs.
StandingHorizontal
Changing the Base Station Position
The base station is configured by installing one of two sets of me- chanical parts that come with the cordless kit. The default mounts (shown below) provide three options: vertical (wall) mounting, standing (45°), or horizontal mounting with a higher mechanical retention of the scanner. Use the other mounts only for horizontal mounting, with lower retention of the scanner. The different parts may be interchanged to customize retention preferences.
A tool such as a rigid pen or a flat screwdriver can be used to change the mounts. Do not allow it to touch the con- tacts.
1.Insert the appropriate parts for the desired base station position, as shown below.
Standing, | Horizontal |
Horizontal | Only |
or Vertical |
|
12 | Gryphon™ I GM4100 |
