Programming
Select the Interface Type
Upon completing the physical connection between the reader and its host, proceed directly to Interface Selection on page 22 for in- formation and programming for the interface type the reader is connected to (for example:
Configure Other Settings
Additional programming barcodes are available in the Gryphon™ I GD4100/GM4100 PRG to allow for customizing programming features. If your installation requires different pro- gramming than the standard factory default settings, refer to the PRG.
Resetting Standard Product Defaults
If you aren’t sure what programming options are in your reader, or you’ve changed some options and want the factory settings re- stored, scan the Standard Product Default Settings barcode below to copy the factory configuration for the currently active interface to the current configuration.
Factory defaults are based on the interface type. Con- figure the reader for the correct interface before scan- ning this label.
NOTE
Standard Product Default Settings
Quick Reference Guide | 21 |
