Datalogic Scanning GM4100 manual Display, Using the Programming Barcodes

Programming

Display

The Gryphon I is also available with an optional Display. The FSTN Display with white LED backlight provides additional in- formation.

Figure 10. Gryphon™ I Display

Programming

The reader is factory-configured with a set of standard default fea- tures. After scanning the interface barcode from the Interfaces sec- tion, you can select other options and customize your reader through use of the instructions and programming barcodes avail- able in the Gryphon™ I GD4100/GM4100 Product Reference Guide (PRG). Check the corresponding features section for your interface, and also the Data Editing and Symbologies chapters of the PRG.

Using the Programming Barcodes

This manual contains barcodes which allow you to reconfigure your reader. Some programming barcode labels, like the Standard Product Default Settings on page 21, require only the scan of that single label to enact the change.

Other barcodes require the reader to be placed in Programming Mode prior to scanning them. Scan an ENTER/EXIT barcode once to enter Programming Mode, scan the desired parameter set- tings, then scan the ENTER/EXIT barcode a second time to ac- cept your changes, exit Programming Mode and return the reader to normal operation.

20 Gryphon™ I GM4100