4.4Connecting to an ESC POS Terminal

The default configuration of your printer is ESC/POS. Check your Terminal communication parameters and change the printer settings to match your terminal settings.

Default Communication parameters

Speed:

9600 baud

Data:

8 bits

Parity:

None

Control:

Hardware

To check the current emulation and communication parameters of your printer:

1.Make sure that a roll of paper is loaded.

2.Set the printer to “Off”.

3.Press both buttons simultaneously until the configuration is printed.

If the configuration is not correct see section 4.4 Changing the Default Settings.

E-3202/Cash Drawer Printer

19

Page 27
Image 27
Datamax E-3202 manual Connecting to an ESC POS Terminal