The 'NIC ADAPTER' section on the Configuration Label will list the printer's current network settings.
After 90 seconds if a DHCP server is not found the printer will fall back to its default network settings of:
IP Address: 192.168.10.2
Subnet Mask: 255.255.255.0
Gateway: 0.0.0.0
If the DHCP retrieval was successful, a new IP address value should be shown. This IP address can then be used to browse to the printer's internal web pages for further configuration or used for installing the Windows Driver.
Using the Printer Configuration Utility (DMXConfig) to set IP values
1.Connect the printer to the host via the parallel or serial port
2.Start the DMXConfig program, see the Printer Configuration Utility section for installation.
3.Click “Query Printer” Button – This will
retrieve the printer's current configuration.
6
