Datamax Ex2 manual Media Guide Adjustment

Media Guide Adjustment

Note: It is important that the Windows print driver 'Stock' setting matches the size of the label you are using. See the Windows Driver section.

1.Unplug the printer from its power source.

2.Press down on both Printhead Latches to unlock the Printhead Carrier. Raise the Printhead Carrier to its up position.

3.Adjust the Media Guides to fit the width of your media. The guides should be positioned so that there is very little side-to-side media movement, but not so tight as to cause friction or bowing of the media.

25