Password protection

When the SCOUTutp system is password protected, the Control software behaves in exactly the same way as the OSD. You must type in the required password to access the Control software. The access you gain depends on the security status –.

To change the security access, close and reopen the Control software, and type in the different passwords.

Administrator (Status A)

The Administrator can:

¾Set and modify all Passwords and security profiles

¾Fully access any computer

¾Use all functions

Supervisor (Status S)

The Supervisor can:

¾Fully access any computer

¾Scan computers

User (Status U)

There are 6 different Users in the SCOUTutp system. Each User has a Profile that defines the access level to different computers. There are 3 different access levels. These are:

¾Y – Full access to a particular computer

¾V –Viewing access only, to a particular computer (No keyboard/mouse functionality)

¾N – No access to a particular computer

By default the User Profile Settings are full access.

Logon and Passwords

You can make the following changes:

1.Edit the Logon and Passwords by choosing them from the Edit menu. See figures below.

2.Make the desired changes.

3.Click OK.

Settings

Choose Settings from the Edit menu. The

Computers’ Properties box appears.

Here you can edit all the data that can be edited in the OSD.

To edit a setting:

1.In the Computer List, select the desired computer or group of computers.

2.Make the desired changes.

3.Check the Select box next to the changed setting.

4.Click OK.

5.To activate the changes press write configuration and then read configuration.

RackAccess i Series