![](/images/backgrounds/141721/141721-219x1.png)
Using the SCOUTutp
Note: Before switching your computers on, please configure non PS/2 computers emulation type in the OSD!
The SCOUTutp provides two possibilities to select the desired computer. You may use either the keyboard Hot Key commands or take advantage of the OSD
You may notice that the mouse cannot be used for around 1 second when the SCOUTutp switches to another computer. This is normal and is caused by the synchronization process which ensures that the mouse operates correctly.
Keyboard Hot Key commands
To send Hot Key commands to the SCOUTutp switch, press and release the Ctrl key twice within 2
seconds. Press a command key for the desired effect. The following commands are supported:
First Key | Second Key | Command Key | Confirmation Key | Command Result | |||
|
|
|
| Port number |
|
| Switches to the desired PC |
Ctrl |
| Ctrl | Enter |
In
OSD (On-Screen-Display)
To access the OSD, press the Hot Key twice and the OSD window appears:
Lines with blue text show active computers, lines with grey text show inactive computers.
To navigate up and down use the UP and DOWN arrow keys.
To jump from one column to another (in
Settings) use the Tab key.
Port | Computer | No. | C = computer |
|
No. | Name |
| S = switch |
|
01 | SUN | 01 | C | blue |
02 | PS/2 1 | 02 | C | grey |
03 | SCOUT | 03 | S | grey |
04 | SUN | 04 | C | blue |
05 | PS/2 3 | 05 | C | blue |
06 | USB | 06 | C | grey |
07 | USB | 07 | C | grey |
08 | PS/2 4 | 08 | C | blue |
|
|
|
|
|
After you have selected a computer press Enter . A confirmation label appears showing which computer you accessed. To exit the OSD or return to a previous window within the OSD press ESC
. Note: When you use the OSD you can’t use the keyboard Hot Keys at the same time.
OSD Settings
Press F2 and the setting window will appear.
When the OSD is password protected only the administrator has access to this window.
OSD Settings
General
Ports
Time
Users
Security
RackAccess i Series