Daxten 16I, 8I Single computer Settings, Upgrading the SCOUTutp firmware

Single computer Settings

To see all the Settings of a single computer, right click the computer icon. The Settings appear as in the figure below.

Note! There is no Select box to check.

Loading a saved configuration

To load a saved configuration:

From the File menu choose Open.

Note: All changes done with the Control software are only reflected in the OSD AFTER pressing “Write Configuration”

The factory default Settings

To revert to the factory default Settings:

On the toolbar press “Set Default”

There is no need to press “Write Configuration”.

Upgrading the SCOUTutp firmware

With the SCOUTutp Update software program you can upgrade the firmware for the OSD, the Manager and the Adaptors

SCOUTutp Update enables you to add new features and fix bugs in a quick and efficient manner. You can install the SCOUTutp Switch Update on any computer, even one not part of the SCOUTutp system.

The SCOUTutp Update software and latest firmware is on the Documentation CD, and on the Daxten website www.daxten.com

System requirements for the SCOUTutp Update software

Pentium 166 or higher, 16 MB RAM and 10 MB free Hard Drive space.

Free Serial port. Windows 98 and later.

Starting and configuring the SCOUTutp Update

1.Start the SCOUTutp Update software. The SCOUTutp Update window appears

The table shown explains the functions of the buttons and boxes in the SCOUTutp Switch Update window.

2.From the Options menu choose Com Port. The Com Port box appears.

3.Choose an available Com Port and click OK.

Button or Box	Function
	Selects all Adaptors
Select
	Unselects selected Adaptors
Unselect
	Starts firmware download
Start
	Displays the firmware version number
F/W
	Displays the hardware version number
H/W
	Cancels selected function
Cancel
	System time
10:06
	Displays download status
Status
	Name of Update file
File

Note! The Serial download cable must be connected to the selected Serial port.

RackAccess i Series