dCS Verona User Manual | Manual for Software Issue 1.0x |
dCS Ltd | September 2004 |
|
|
Mains Voltage Setting
Before connecting the power cable to your Verona for the first time, please check that it has been set to the correct operating voltage for your local mains supply. 50Hz or 60Hz operation is not important – the unit can use either. The unit's present voltage setting is shown on the label beneath the mains inlet on the rear panel. If this does not match your local supply voltage, DO NOT attempt to use the unit. Contact your dealer to arrange to have the unit reset. Using the Verona with the wrong mains setting for your local supply may result in serious damage to the unit and will invalidate the warranty. DO NOT attempt to reset the unit yourself.
IMPORTANT! Please use a sensible power cable, such as the one supplied with the unit. Some audiophile power cables presently available are excessively heavy, their weight can damage the power inlet connector. Such damage is not covered by the warranty.
Positioning the Unit
Place Verona on a firm, vibration free base so as to allow convenient connection to your digital source. We suggest that you avoid siting Verona either directly above or below preamplifiers or tuners, if either of these will be used in your system at the same time as Verona.
Manual filename: Verona Manual v1.0x.doc | Page 29 | email: more@dcsltd.co.uk |
English version |
|