dCS Verona User Manual | Manual for Software Issue 1.0x |
dCS Ltd | September 2004 |
|
|
Safety and Electrical Safety
There are no user serviceable parts inside Verona and so there is no need to remove the covers. If for some reason you do:
IMPORTANT! Disconnect the power cable before removing any covers or changing the fuse.
There are no substances hazardous to health inside Verona.
Cleaning the Case
Do not apply any of the following cleaning products to the case as they will damage or alter the finish:
•Corrosive or abrasive agents
•Spirit or alcohol based cleaners
•Wax polish
do this: To remove dust, wipe with a moist, soft cloth.
do this: To remove deposits from the case, first disconnect the power cable then spray very lightly with a proprietary glass cleaner containing ammonia and wipe off gently with a soft cloth, taking care to avoid scratches. Do not spray the cleaner onto the connectors or the rear panel.
Manual filename: Verona Manual v1.0x.doc | Page 34 | email: more@dcsltd.co.uk |
English version |
|