
LIGHTING INSTRUCTIONS
TO LIGHT THE GRILL BURNER:
NOTE: Open the grill lid. Turn all knobs to “OFF”. Turn the main gas supply on. If you smell gas, shut off gas supply and call for service.
Push and hold the igniter button, turn the selected burner knob to “HI”. If burner does not light in 4 to 5 seconds turn knob “OFF” and wait 5 minutes before trying again for any accumulated gas to dissipate.
MATCH LIGHTING:
If the burner will not light after several attempts then the burner can be match lit. If you’ve just attempted to light the burner with the igniter, allow 5 minutes for any accumulated gas to dissipate. Keep your face as far away from the grill as possible and use one of the methods below to light the grill.
METHOD 1 – Using the match lite clip
NOTE: The clip can be found inside the drip tray.
STEP 1
Use the match lite clip provided inside the drip pan.
STEP 2
Sandwich the match betwen the coils as shownFIG. 10 in Fig. 10.
STEP 3
Light up the match and guide it though the first or second opening on the radiant (Fig. 11). Then push and turn the control knob to “HI”.
If the burner does not light in 4 seconds, turn the knob “OFF”, wait 5 minutes and try again.
FIG. 11
METHOD 2 – Using a butane lighter
A butane lighter can be used instead of the match lite clip. Follow the instructions in STEP 3 above.
FIG. 12
17