Installation Instructions
CABINET PREPARATION
The Drop-In Cooktop was designed for easy installation. However, for the best appearance, to conceal the raw cutout edges and to ensure a snug and secure fit, the cutouts must be precise. Use the cutout dimension information in the figures below for your installation.When preparing for installation, it is critical that the cabinet cutout matches the cutout dimensions provided for the cooktop for a good fit. See illustrations below for specifications.
• For proper performance, the Drop-In Cooktop must be level.To achieve a flush fit of the cooktop, it will be necessary to have a flat cabinet (front to back and left to right).
•Be sure to check local building codes for the proper method of installation. Local codes may vary. Installation, Electrical connectors, and Grounding must comply with all applicable codes.
DROP-IN COOKTOP
CUT-OUT DIMENSIONS
5" Min. clearance
to combustible surface
2 1/4" Min. clearance 
34 3/4" Width 
to combustible surface
19 3/4" Depth
DROP-IN COOKTOP
CUT-OUT DIMENSIONS
(W/DCS DD-36SS)
34 3/4" Width 
33 1/2"
19 3/4" Depth
5" Min. clearance
to combustible surface
13
