R
INSTALLATION INSTRUCTIONS
STEP 9: MEASURING THE TOE KICK (DOUBLE MODELS ONLY)
21 Partially open the bottom drawer. Turn Prefinished Toe Kick upside down and hold vertically against the bottom edge of the Tub side (not the drawer front).
Mark the position of the bottom edge of the Tub side on the Toe Kick.
Choose the nearest groove to the pencil mark which will result in the shortest Toe Kick.
21
Bottom edge of tub side
STEP 10: TRIMMING THE TOE KICK (DOUBLE MODELS ONLY)
22
23
Important!
Before cutting ensure the Toe Kick is positioned on a wooden
chopping board to avoid damage to surrounding area.
22On the chosen groove cut down the vertical ribs at the centre and the ends using a knife. Cut along full length with a knife. Turn Toe Kick over, bend and then cut from front. Sand or scrape bottom edge to remove rough patches.
WARNING!
Remove all sharp edges
23To avoid a cutting hazard remove all sharp edges after trimming.
24
24Remove Toe Kick tabs by snapping them off.
11