MAINTENANCE
Cleaning the oven
•Switch off the electrical power supply before cleaning any part of the appliance.
•Open the oven door and allow the oven to cool down.
•Clean the oven with a damp, hot soapy cloth.
•It may be necessary to soak burnt soils with a liquid cleaner to soften them before scrubbing them with a nylon brush or scouring sponge.
•Heavy soils on the bottom of the oven may require overnight soaking under a sponge liberally sprinkled with household ammonia. The soil can then be removed the following morning by washing normally.
•Do not use metal objects or steel wool to clean the oven
•For your convenience, the shelves, side racks and element guard may be removed to improve access.
•After cleaning, fit the bottom element into the hooks of the element guard. Failure to observe this precaution would allow the element to rest on and possibly damage the oven enamel. (models 600C and 600S)
General cleaning
•Switch off the electrical power supply before cleaning any part of the appliance.
•Wipe down glass panels, cabinet, door, control knobs, trims and handles with a hot soapy cloth.
•Use only liquid household cleaners and avoid abrasive powders, scouring pads and caustic cleaners.
•Rinse and wipe down with a clean cloth.
Oven light
The oven light is switched on by the oven thermostat and switches off when the thermostat knob is returned to 0.
To replace a faulty light bulb, proceed as follows.
•Switch off the power at the wall switch to avoid the possibility of electric shock.
•Remove the light cover by unscrewing it in an
•Unscrew the faulty bulb and fit a new 25 watt bulb rated for 300°C
•Refit the light cover.
