Defy Appliances 600ST MAINTENANCE continued, disengaging, on the door to prevent, the clasps from

MAINTENANCE continued

Lift-off oven door

The oven door may be removed to improve oven access during cleaning

Grasp the open door on both sides near the hinges

Flip the retainer clasps up	Lift the door upwards and
and over the hook on the	outwards until it is free of
upper hinge arm .	the hinge housing
Maintain upward pressure	After cleaning, refit the
on the door to prevent
the clasps from	door in reverse order.
disengaging

Removing the inner door glass.

•The glass may be removed for cleaning purposes by removing the two screws which hold it in place.

•It is now possible to clean the inside of the outer glass if required.

•Wash the glass in hot soapy water, rinse and dry.

•Re-assemble by carefully locating the rubber seal in the embossed groove before fitting the glass. The glass is marked “THIS SIDE TOWARDS OVEN”.

•Re-fit the two securing screws.

Removing the side racks and shelves

•The side racks and shelves may be removed for cleaning purposes.

•Remove the bottom bake element guard.

•Slide the shelf out fully against the shelf stop.

•Lift the shelf slightly and slide it out

•The side racks may be removed by pulling the retainer rod slightly downwards thereby dislodging it from the retainer lug at the bottom

centre. Lift the racks free of the retaining slots in the oven wall.

•Replace in reverse order of disassembly.